JumpsPower AMG24 Powersports Battery - 12/24V Truck Jump Starter With Ingenious Spark-proof clamp
What’s JumpsPower™ - AMG24?
It is an ultra light weight device with multi-function as…
12/24V Jumpstarter – to Jump Start a dead battery of Truck, Motorcycle, Boat, Jet Ski, ATV and Lawn Mower just in seconds. It can jump start the vehicle battery 10 times on a full charge.
Power Bank – to charge portable electronic devices, such as mobile Smartphones, tablets, portable gaming system, digital cameras, camcorders, Bluetooth headsets, portable GPS devices, and any other DC 5V powered electronic devices. It only takes 1-hour for a smart phone to be fully charged.
LED Light – to use as a torch with the built-in LED torch light function
~ 100% Australia Owned and Operates
~ World’s smallest and thinnest design; only 1.6KG; 10 times lighter than traditional jumpstarter
~ It’s a Jumpstarter – quickly jump starts a dead battery of 12V/24V Petrol/Diesel vehicle just in seconds
~ It’s a Power Bank – quickly charge for all brands of portable electronic devices
~ Only takes 1-hour for a smart phone to be fully charged
~ It’s a torch, with a built-in LED emergency light
~ High Capacity Lithium Ion battery power pack: 22000mAh
~ Use of Japanese Chipset, battery standby time can reach >2000 hrs*
~ Battery Life Cycle: 500+
~ Dual Input Charging System: USB 2A/Car adaptor
~ Dual Reverse Polarity Protection and over-charge/over-discharge protection
Output: 5V 2A; 12V/24V Jump start
Input： 14V 1A(AC&DC adapter included)
Battery Capacity： 22200 mAh
Jump start current： 12V (300-600A); 24V (400-800A)
Operating temperature : -20℃~60℃
Recommended Vehicle Engine Displacements for Jump Starting:
12V vehicle: Up to 12-cylinder petrol vehicles-7.0 displacement(7000cc or below)
Up to 12-cylinder diesel vehicles-7.0 displacement (7000cc or below)
24V vehicle: Up to 24 tonnes Truck
1. Before jump starting the vehicle, please check below carefully.
u Make sure the【12V / 24V Switch】is set on the right voltage mode:【12V Mode】 for 12V vehicle while【24V Mode】for 24V vehicle.
u Make sure the battery level of JumpsPower™ is above 60% (At least 3 indicator lights stay ON).
2. Connect the jumper cable to the drained battery of the vehicle. Connect RED clamp to the positive “+” terminal and BLACK clamp to the negative “-” terminal.
u If both 【12V Indicator】& 【24V Indicator】 are flashing rapidly, means incorrect connection of the jumper cable clamps and battery terminals, reverse polarity protection will be in place to cut the power. Please check and reconnect it.
u Many vehicles feature alternate starting points, away from the Battery. Always use the alternate starting points wheneveravailable.
3. If 【12V Indicator】is ON, it's ready to jump start 12V vehicle. To jump start a 24V vehicle, please press down the 【BOOST Button】for 2-3 seconds until the【24V Indicator】is ON, it's ready to jump start.
4. Now attempt to crank start the engine(REMOVE THE CRANK). If engine does not start, wait at least 10 seconds beforeattempting to start the engine again.
5. After jump starting, disconnect the BLACK NEG (–) clamp first, then disconnect the RED POS (+) clamp.
Q1: What are the features of the JumpsPower™?
A1: Apart from jump starter function, the JumpsPower™ can be used to charge portable electronic devices, such as mobile smart phones, tablets, portable gaming system, digital cameras, camcorders, Bluetooth headsets, portable GPS devices, and any other DC 5V powered electronic devices. It can also jump start a drained car battery with the supplied jump start cables. There's also an included ultra-bright LEDlight that can be used as a torch light.
Q2: Can this device jump start a 12V and 24V vehicle?
A2: Yes. If you want to jump start a 12V vehicle, please make sure to select the 【12V mode】by sliding the【12V/24V Switch】to the left. Once the 【12V indicator】 light is on, it's ready to jump start. If not, press and hold the “Boost Button” for 3 seconds until the light is on before jump start. If you want to jump start a 24V vehicle, please make sure to select the 【24V mode】 by sliding the【12V/24V Switch】to the right, press down the【BOOST Button】for 2-3 seconds until the light is on, it's ready to jump start.
Q3: When the vehicle is out of battery or disconnected with battery, can this device jump start the vehicle?
A3: Yes. First, carefully select the right voltage mode for your vehicles and set the 【12V/24V Switch】to the left - 12V mode for 12V vehicle or to the right - 24V mode for 24V vehicle. After setting, connect the positive and the negative terminal correctly, then press the【BOOST Button】, it's ready to jump start the car.
Q4: How does the Ingenious Spark-proof clamps work?
A4: If the【12V Indicator】light is on, means ready to jump start a 12V vehicle; If the【24V Indicator】light is on, means ready to jump start a 24V vehicle. If both【12V Indicator】 & 【24V Indicator】lights are flashing rapidly, means incorrect connection of the jumper cable clamps and battery terminals, please double check and reconnect; If no indicator lights is on, please press down the【BOOST button】for 2-3 seconds, until the indicator light is on, means ready to jump start. If no battery indicator light is on, means the jump starter with low battery, need to recharge.
Q5: Will reversing polarity connections of the jump start cable damage the vehicle?
A5: Not at all, JumpsPower™ is very safe with “Dual Reversing Polarity Protection”. If you accidentally connect the RED and BLACK cable clamps to the wrong polarity terminal and attempt to jump start the vehicle, both the【12V Indicator】 and 【24V Indicator】lights will be flashing rapidly. The Reverse Polarity Protection will be in place and cut the power immediately to prevent injury and avoid damaging the vehicle.
Q6: What if JumpsPower™ doesn't jump start the vehicle?
A6: If JumpsPower™ fails to jump start the engine, please wait at least 10 seconds before attempting to try again and please do not continuous cranking for over 5 seconds each time. If still not succeed after 3 attempts, it may be due to other problems of the vehicle. Do not try to crank the engine continuously for more than 10 times in a row. It is also highly recommended to replace the vehicle battery once every 2-3 years.
Q7: How many times can the JumpsPower™ jump start a vehicle?
A7: Approximately 10 times with a 100% fully charged battery. Results may vary depending on user usage and vehicle engine displacement.
Q8: How long is the JumpsPower™ standby time?
A8: The standby time of the JumpsPower is up to 12 months if it is fully charged. It is recommended to charge the JumpsPower every 3 months to prolong its service life. Result may vary depending on the owner usage.
Q9: How long will it take to fully charge the JumpsPower™ to the maximum battery level?
A9: It takes about 8 hours.
Q10: How long will it take to fully charge a mobile phone?
A10: It will take about 1 hour.
Q11: How to turn off the JumpsPower™?
A11: The JumpsPower™ has an auto turn-off feature. Once the connected electronic device has been fully charged or no load to the charger, the JumpsPower™ will automatically stop charging and enter into sleeping mode.